Parts & Accessories

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

This is a super strong Magnet Tube Clip that will keep your drink tube in a secure and accessible position even on the wildest rides. Easy to hook and attach to the harness of your backpack or at the front of your jersey, depending on what works best for you. The days of having to detach your drink tube from a simple plastic clip could now be over. Instantly make your hydration so much more accessible by attaching it using this magnetic clip. Just grab the tube and it'll detach instantly allowing you to take a sip. The magnet is quite strong so once you're done drinking just drop get the clip close enough and it will easily connect back onto the harness.

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base. Compatible with all TWIST Bottles. - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bottles

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux reservoir.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)

The Ultimate in Rear Hydration Systems. The next generation of our world championship winning Carbon Wing adds extra user adjustability and saddle compatibility into a faster than ever package. - TWICE AS FAST: Extensive aero research offers nearly twice the time savings over previous generations. - INCREASED ADJUSTABILITY: From the carrier to the cage, all optimizing speed and bottle access. - INCREASED BOTTLE RETENTION: Cages re-positioned for optimum retention and easier access. - CARBON BEAM: Special proprietary layup helps reduce cage vibration. - WIDER COMPATIBILITY: Fits the widest range of saddle rails by mounting on the saddle's horizontal rail.

Highly adjustable stainless-steel carrier with three ways to dial in your fit. Includes our impressive gripping GORILLA cage. Designed to accommodate saddles with transition hooks. The DELTA series of saddle mounted carriers have the largest degree of adjustability of any rear carrier, allowing you to place your bottle in the aerodynamic “sweet-spot” directly behind the rider, minimizing drag and maximizing time gains, typically between 120 and 165 seconds over the course of a full distance triathlon.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

Hydration on the road is critical, and the Direct Mount Reserve Rack helps ensure that you have adequate supplies of H2O or your liquid nutrition of choice right there when you need it. This simple water-storage solution holds up to two water bottles, provides a sleek and aero profile, and mounts easily under any SWAT-compatible saddle. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Holds up to two water bottles behind the saddle for a more aerodynamic profile.

Our updated MoFlo cap retains the same mechanism and delivers great flow. It's easier to clean with a flush top and improved grip. The MoFlo valve is easy to open, effortless to use, and 100% leak-proof when closed. - Flush top for easy cleaning. - Engineered poppet design provides 100% leak-free performance. - Valve is soft to the touch and effortless to open and close.

SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.