Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride.
Compatibility:
Requires a star nut or compression plug with a M6x1 thread.
Works with road and mountain shifters and brake levers.
Compatible with most hanger alignment tools on the market.
Recommendations:
It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
- Durable fiber reinforced Composite Matrix construction.
- Optimized side-load design for easy access in compact frames.
- Available in right-side configuration only.
- Integrated storage container.
- CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately)
- CO2 inflator head
- V Pro 17 multi-tool with tubeless reamer and tire plug kits
Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-2 has 1.3mm tips on bent nose blades for medium, internal snap rings. The tips of the RP-2 open from 22mm down to 2mm (center to center).
A great shop accessory made to hold a wide variety of axles, spindles and any Park Tool Freewheel Remover/Lockring Tool. Made from precision extruded aluminum.
Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.
-Utilizes a 12mm guide pin to stabilize the tool during use
- Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter)
- Fits some Shimano and similar disc brake rotor lockrings
Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort.
- 1/8-inch model works on 1/8-inch chains and sprockets
- 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools
- Features hardened pins to keep the chain in place
The TWB-36 is a crow foot style wrench used with any 3/8-inch drive torque wrench and drive tools with 36mm wrench flats such as Park Tool LRT-2, LRT-3, LRT-4 and BBT-18 to verify components are torqued to the correct specification. Constructed from heat-treated 4130 laser-cut steel and plated for long life.
- Made from laser cut tool steel heat-treated for strength and lasting performance
- New design features 24mm socket driver for use with Pedro's professional socket tools
- 290mm length and ergonomic shape provide excellent leverage and comfort
- Smaller lightweight design perfect for travel and the toolbox
Pulling inspiration from our shop wrenches and using the same laser-cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools. Features include a long 290mm length, cushioned plastic grip for control and comfort, heat-treated tool steel construction for strength and lasting performance, new 24mm socket driver, and a precision-cut 15mm wrench opening positioned at a 30 degree offset to improve mechanical advantage and wrench positioning. The smaller, lightweight, 215g design is perfect for travel and easy to fit in the toolbox.
• For adding or replacing cage & rack mounts
• Inserts are 10 to a bag
• M5 x 12mm Steel Insert
• Precision-sized, hardened-steel, chrome-plated spoke wrench
• Deep U-channels for a great grip
• 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples
• Made in Taiwan
- High quality Kraftform Plus screwdrivers.
- Multi-component Kraftform Plus handle
- Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- The tips are microscopically roughened for optimal bite to the screw.
- "Take it easy" tool finder with color coding according to profiles and size stamp
- The hexagonal anti-roll feature
- Small screwdrivers with short blades for hard to reach areas.
- The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working.
- Wera Bit technology.
- Special surface treatment of the blades for high corrosion protection
- The hexagon anti-roll protection
- High quality Kraftform Plus screwdriver.
- Multi-component Kraftform handle for fast and low-fatigue working.
- Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Holding function
- Anti-roll feature prevents any bothersome rolling away at the workplace.
- Handle markings for simplified finding and sorting of the tool.
- High quality Kraftform Plus screwdriver.
- Multi-component Kraftform handle for fast and low-fatigue working.
- Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Holding function
- Anti-roll feature prevents any bothersome rolling away at the workplace.
- Handle markings for simplified finding and sorting of the tool.
- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations.
- The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses.
- The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided.
- Holding function (HF) to securely hold the TORX screw on the tool.
- Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.
- Bit socket with 1/4 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Bit socket with 3/8 inch drive and holding function.
- "Take it easy" Tool Finder with color coding according to size
- Compatible for Manual and power tool socket insert (ISO 2725-Part 3)
- "Take it easy" Tool Finder with color coding according to size
- Featuring a good grip to allow easy pick-up even with oily hands.
- Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.
- Particularly suitable for narrow wrenching situations on the bike
- Joker 6003 pedal specifique size 15mm with flat mouth to mount and dismount pedals
- Special mouth geometry expands the placement possibilities of the tool
- High-quality surface treatment achieves a high and long-lasting corrosion protection.
- Low return angle in the mouth "takes" the screw every 15°
Includes:
- Joker 6003 size 6, 7, 8, 9 ,10, 11, 12, 13, 16, 17mm
- Joker Pedal wrench 15mm
- Joker pouch suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system
- 3/8'' Bit sockets for the most common TORX and Hex screws
- Long bit sockets with extra slim, cylindrical profile zone for low-located couplings (e.g. for bottom bracket ball bearing or stem-fork-clamping)
- With extra slim 30mm long profile area
- With Take it easy tool finder: color coding by size
- Knurling on lower socket end for more grip when used manually
Includes:
- Robust textile pouch
- Torx (TX25, TX30) socket
- Hex-Plus (4, 5, 6, 8, 10mm)
- Minimalist, lightweight multi-tool option stored at the end of an axle during rides for easy access during quick adjustments and trailside repairs.
- On one side of the handle is a 5mm hex end stepped to 6mm
- Compatible with Wolf Tooth rear axles that have threaded axle bolt (091000).
- Four double sided bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Two double-sided hex bits can nest on the inside of the handle via magnet
$0.86
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
Page 1 of 42
Next page