Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

iSSi Cleat Set
$19.00
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
Wahoo Speedplay Zero Pedals
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed
Time XPro & Xpresso Fixed Cleats
$22.00
The Iclic fixed cleat works with all XPro and Xpresso pedals. This cleat is only available independently and is not included with new Xpro and Xpresso pedals. This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. It's compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
Time Xpresso ICLIC Free Float Cleat
$20.00
The Xpresso Free float cleats have been developed for the TIME Xpresso Road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats), in order to optimize performance following 3 points: security, ergonomics and performance. The Bi-material brings more durability when walking with the cleats. - Weight: 85g/pair
Sunlite ATB Pedals
$15.00
- Plastic nylon molded body - Chromoly spindle - 318g pair
Sunlite Classic Block Pedals
$19.99
- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair
Sunlite Juvenile Pedals
$13.99 - $15.00
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
Sunlite Low Profile ATB Pedals
$16.00
- Forged alloy body and cage - Chromoly spindle - Toe clip compatible - 391g pair - 9/16-inch spindle
Sunlite Toe Straps
$10.00
- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length
Spank Spoon DC Pedals
$64.99 - $69.95
- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized
Shimano PD-GR500 Multi-Purpose Flat Pedal
$80.00
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions. - 3 different pin height settings to match different type of riding - 9 pins per platform - Highest setting is+5 mm higher than PD-MX80's pins - Weight: 533g
Shimano PD-M520 Pedals
$50.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)
Shimano PD-M540 Pedals
$79.99 - $85.00
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)
Shimano PD-R7000 105 Pedal
$150.00
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
Shimano SM-SH56 Multi-Release SPD Cleat Set
$19.00
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals
Shimano SPD-SL Cleat Set
$31.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11
Ritchey WCS Carbon Echelon Road Pedal Replacement Cleats 0° Float
$19.95
Authentic replacement Zero-Float Cleats for Ritchey Echelon Carbon Fiber Road Pedals
Power Grips Fat Straps
$29.95
- Fixie style straps that are compatible with most flat pedals - Provide the pulling power of straps with the easy release of clipless pedal system - Stiff, wide straps do not need toe clips
Origin8 Mountain Double-Sided Clipless Pedals
$81.49
- Double-sided clipless design - Forged 6061 aluminum body - DU bushings - SPD compatible (6° float) - Chromoly 9/16-inch spindle - 275g pair
Origin8 SPD Cleats
$20.39
Origin-8's SPD Cleats are compatible with Shimano SPD-style pedals. These cleats are single release.
Origin8 Ultim8 MTB Single Clipless Pedals
$58.59
Origin-8's Ultim8 MTB Single Clipless Pedals feature adjustable SPD-compatible bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also sometimes with regular shoes. With sealed bearings and chromoly axles, the Ultim8's are durable and practical all-around pedals.
Origin8 Ultim8 Slimline Platform
$100.00
Origin-8's Ultim8 Slimline Platform pedals feature ultra-light and thin forged 6061-aluminum platforms, heat-treated chromoly axles, and cartridge bearings for a super grippy, ultra-smooth, lightweight and reliably tough set of pedals. They also have replaceable pins. - 9/16-inch - Weight: 276 grams
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
LOOK Delta Cleats
$25.00
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g
LOOK Geo Trekking Grip
$80.00
The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite / Elastomer bi-injection - Traction: Elastomer bi-injection - Spindle: Chromoly+ - Platform width: 86mm - Weight (pedal): 228g - Weight (pair + cleats): 511g
LOOK Keo 2 Max
$114.99
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g
LOOK Keo 2 Max Carbon
$135.00
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g
LOOK Keo Blade Carbon
$165.00
KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 8 + additional 12 in box - Body: Carbon - Blade: Composite - Spindle: Chromoly+ - Bearings: Steel - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 115g - Weight (pair + cleats): 300g
LOOK Keo Cleat Covers
$14.99
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat
LOOK Keo Grip Cleats
$25.00 - $28.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g
LOOK Trail Grip
$86.00
LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip + Composite studs - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 265g - Weight (pair): 530g
LOOK Trail Roc
$86.00
The new LOOK Trail Roc is the maximum grip, full metal pinned pedal for aggressive riding. The distinctive lightweight, low profile design gives centered control and feedback with adjustable pins for ultimate grip. With our championship proven bushing and bearing system on oversized 17mm axles, your next hardcore pedal is here. - Technology: Flat pedals - Body: Alloy - Traction: 12 metal pins per side - Spindle: Chromoly+ - Surface area: 110x110mm - Profile: 17mm - Weight (pedal): 215g - Weight (pair): 430g
LOOK X-Track
$55.00
The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Aluminum - Spindle: Chromoly+ - Platform area: 350mm² - Platform width: 57mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°
LOOK X-Track Easy Cleats
$20.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g
LOOK X-Track Race Carbon
$140.00
The X-TRACK RACE CARBON pedals offer the best surface contact area-to-weight ratio, thanks to a carbon body design. The large surface area and shape also offers plenty of stability to ensure a consistent feeling pedal stroke. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 175g - Weight (pair + cleats): 400g - Float angle: 6° - Release angle: 13°
Giant Plastic Platform Pedals
$20.00 - $22.50
Giant's Plastic Platform Pedals boast light and durable fiber-reinforced nylon bodies with wide, low-profile platforms and 10 molded pins per side for an excellent grip. You also get tough chromoly axles, quality bearings, and reflectors for visibility. - 9/16-inch spindles - 350 grams (pair)
Garmin Rally XC100 Single-Sensing Power Meter
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
Garmin Rally XC200 Dual-Sensing Power Meter
$1,199.00
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
Fyxation Mesa MP Pedals
$59.95 - $69.95
An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions. - High-impact nylon body built to take abuse - Smooth-running sealed bearing and DU bushing - Electroplated chromoly spindle - Electroplated stainless steel replaceable pins for added grip with shoes or boots - Nylon body doesn't suck heat out of your feet like alloy pedals do - Height: 14mm - Width: 105mm - 9/16"
Exustar E-BSL11 Cleat Set
$19.00
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Exustar E-RSL11 Cleat Set
$19.95
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
Dimension Town Pedals
$19.99
Dimension Town Pedals. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel
Delta Foot Fenders
$12.99
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Crank Brothers Candy 7 Pedals
$165.00 - $169.00
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
Crank Brothers Double Shot 1
$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair
Crank Brothers Easy Release Cleat Kit
$26.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers Eggbeater 1
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
Crank Brothers Eggbeater 2
$99.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.
Crank Brothers Mallet DH
$180.00
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Crank Brothers Stamp 1 Large
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Large LE
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Zero Float Cleats
$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
Chromag Synth
$65.00 - $149.99
Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.
iSSi Road Cartridge Spindle Rebuild Kit
$46.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
iSSi Spindle Rebuild Kit
$55.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
iSSi Stomp
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. Available in two sizes, Standard for most riders, and an XL version for folks seeking the maximum contact patch. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 102 x 18mm (XL) - Platform size: 120 x 95 x 18mm (Standard) - 64.5mm spindle length (XL) - 57mm spindle length (Standard)
iSSi Thump Replaceable Pin Kit
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Page 1 of 7 Next page