Filter By:
- Accessories (262)
- Gloves (289)
- Jerseys/Tops (Short Sleeve) (163)
- Jerseys/Tops (Long Sleeve) (68)
- Outerwear (170)
- Protective/Armor (144)
- Running (16)
- Shirts/Tops (Casual) (122)
- Show More Categories
- Shorts/Bottoms (260)
- Shorts/Bottoms (Casual) (11)
- Socks (361)
- Triathlon (9)
- Undergarments (58)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Clothing
$26.99
Reach Your Highest Peak: The Most Technologically Advanced Sock for Hiking and Trail Runs. Designed to provide your feet with advanced stability and support so you can get the most out of your next trail adventure. Swiftwick FLITE XT® Trail features AnkleLock™ Technology that supports your ankles during quick movements on uneven & varying terrains, while GripDry™ Fibers in the heel and forefoot keep your feet from sliding in your shoes. But, we didn't stop there - we blended natural Merino Wool with a full Olefin fiber footbed to move moisture away from your feet, keeping them dry and blister-free even during the longest of treks. Made in USA
$35.00
Our Body Geometry Dual-Gel gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure.
- Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort
- Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising grip
- Combination of breathable mesh at the upper and soft Lycra make for a durable and comfortable top of hand
- Soft and absorbent Microwipe thumb brushes away sweat with ease
- Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves
- Reflective elements increase your visibility to motorists in low-light conditions
$40.00
Our Body Geometry Dual-Gel Long Finger gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure. And lastly, phone use is a non-issue, as the fingertips are designed to be touchscreen-compatible.
- Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort
- Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising bar grip or control
- Soft and absorbent Microwipe thumb brushes away sweat with ease
- Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves
- Reflective elements increase your visibility to motorists in low-light conditions
- Compatible with conductive touchscreens
$10.00 - $21.00
Full finger protection with minimal padding. Long-lasting quality construction and materials.
- Foam Padding Absorbs Shock And Improves Comfort
- Covered Fingertips For Added Protection
- Durable Microfiber Palms
- Soft Thumb Towels For Wiping Perspiration
- Neoprene Wrist Cuff Provides Flexibility
- Breathable Four-Way Stretch Upper
- Pre-Formed Finger Curvature For Natural Fit
$55.00
What makes these midweight gloves special is that there is no tradeoff between insulating warmth and handlebar feel, making them indispensable for fall and early spring riding. We begin with 60g Primaloft Gold w/Crosscore technology on the back of the hand, which incorporates Aerogel particles for maximum warmth with minimal bulk. But we keep the AX Suede Laredo palm insulation-free; creating a glove that insulates you from the elements, not control of the bike. The main body fabric provides wind protection with excellent dexterity and the synthetic leather palm makes the glove as grippy as it is durable. This is our most sensitive insulated glove.
- 60g Primaloft Gold w/Crosscore technology insulation, which is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for maximum warmth with minimal bulk
- AmFIB Softshell back of hand fabric protects from wind and water
- AX Suede Laredo synthetic leather palm for durability and great grip
- Touch-screen-compatible index finger and thumbs
- Back: 87% polyester, 8% nylon, 4% polyurethane, 1% spandex
- Palm: 77% polyester, 17% polyurethane, 6% nylon
- Lining: 100% polyester
- Made in Vietnam
$85.00
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers.
- AmFIB Softshell provides superior wind and water protection
- 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight
- Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off
- Anatomic paneling for a performance fit
- BioViz reflective elements for low-light visibility
- Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA
- Lining: 100% polyamide
- Made in Vietnam
$150.00
Make the most of the shorter days of the year with a well-designed apparel system. The Interval AmFIB Lite Jacket provides the warmth you need to enjoy cold weather rides. We use our three-layer windproof, water-resistant AmFIB softshell fabric on the chest and the leading edges of the arms to shield you from biting headwinds. Thermal fleece fabric on the back of this jacket balances insulation with breathability, so you can ride in comfort without chilly sweat build-up. Tune this jacket's warmth to suit the day's conditions by adding a light or heavyweight base layer underneath. A zippered chest pocket holds essentials and three bellowed rear pockets are large enough for winter gloves, a neck gaiter, and other cold-weather gear.
FEATURES
- Windproof, water-resistant AmFIB chest and arm panels with fleece insulation
- Zippered chest pocket holds most smartphones
- Three rear pockets for on-bike essentials
- DWR protection sheds water
- BioViz reflective elements enhance low-light visibility
- Form fit with stretch for layering
- Constructed from sustainably-sourced recycled materials
$35.00
Not your typical balaclava! An updated design gives this ultimate winter weather head cover added versatility, ideal for battling the most brutal cold conditions. Keep the moveable face panel all the way up for extreme warmth, then pull it down for easy temperature regulation—or quick access when you need to talk. The premium P.R.O. Barrier forehead fabric provides protection against wind, and P.R.O. Thermal Dry fabric adds fast-drying warmth while fitting easily underneath your helmet.
- Adjustable face panel allows for easy temperature regulation
- P.R.O. Barrier fabric panel on forehead provide lightweight wind protection and water resistance
- P.R.O. Thermal Dry fabric provides optimal moisture transfer, dry time and odor absorption with warmth
- Ergonomic cut layers easily under helmet
- Reflective elements for low-light visibility
- One size fits most
$30.00
A snug and streamlined full head cover with a wind-resistant front panel to keep you cozy in the thick of winter. Precisely tailored to fit under a helmet, the Barrier Skull Cap's mildly scalloped back prevents fabric bunching while in the cycling position. P.R.O. Thermal Dry fabric provides quick-drying warmth, reflective elements enhance safety, and an otherwise hidden rear port opens as needed to accommodate a ponytail.
- P.R.O. Barrier fabric panel on forehead provide lightweight wind protection and water resistance
- P.R.O. Thermal Dry fabric provides optimal moisture transfer, dry time and odor absorption with warmth
- Ergonomic cut layers easily under helmet
- Low profile ponytail port allows for long hair and does not interfere with helmet retention mechanisms
- Reflective elements for low-light visibility
- One size fits most
$45.00
This is our most popular cool-weather glove. If you like the 3D-shaped gel padding in our Elite Glove, this is our warmer version. An AX Suede Uno synthetic leather palm allows four-way stretch for unparalleled fit, breathability and bar feel. The back-of-hand softshell uses a lightweight, three-layer construction to provide both wind and water protection, and the gauntlet is long enough to ensure overlap with a jacket to prevent a bare wrist.
- BioViz reflective elements for low-light visibility
- Hook-and-loop closure for perfect fit
- New 3D-shaped gel pads reduce bulk and improve grip comfort
- AX Suede Uno synthetic leather palm with 4-way stretch offers improved fit, breathability, and bar feel
- Three-layer softshell back of hand fabric protects from wind and water
- Palm: 81% Polyester, 9% Polyamide, 8% Elastane, 2% Polyurethane
- Back: 62% Polyester, 26% Polyamide, 7% Elastane, 5% Polyurethane
- Lining: 100% Polyester
- Made in Vietnam
$125.00 - $130.00
When your next ride is a big one, the Expedition Bib Short is the right choice. We integrated low profile cargo pockets on the thighs and lower back for easy access to smartphones and snacks, and the flexibility to wear any top you prefer without worrying about carrying capacity. This bib short was created to go the distance with a plush and breathable Elite Escape 1:1 Chamois that' the perfect companion for long days in the saddle.
$85.00
Discover comfort and support with our Attack Short, a great entry point for any dedicated cyclist. Crafted with a soft polyester knit fabric and low-profile elastic leg bands, these shorts offer an optimal balance of mobility and compression. The advanced ELITE Levitate chamois pad delivers dual-density cushioning that provides elevated support for bone structure while maintaining airflow and circulation. Grab a pair for your next long distance tour or quick after work ride.
FABRIC
- 80% recycled polyester, 20% spandex
FEATURES:
- Soft polyester knit fabric with raw edge leg hem transfers moisture and provides mild coverage for brisk days
- Dual-density ELITE Levitate chamois minimizes skin abrasion and sit bone discomfort
- Stay in place silicone leg gripper
- Made with recycled content
- BioViz® powerful reflective elements that reach 100 meters for night visibility
- 10" inseam
$110.00
This is our heaviest base layer, at 250g/m2. It combines our 18.5-micron responsibly sourced Merino and recycled polyester technical fibers in a remarkable construction that positions the polyester next to your skin for maximum wicking while the wool faces out for superior insulation. With its long sleeves it is the ideal garment to layer beneath one of our AmFIB jackets. Thumb loops keep the sleeves in place as you pull on your jersey.
- Mid-weight Transfer Merino fabric combines wool and recycled polyester for sustainable technical performance.
- Unique plated fabric construction places polyester next to skin and merino on the exterior for superior moisture transfer and thermal regulation.
- Made using fine 18.5-micron merino wool for superior comfort.
- Recycled Repreve XS Polyester technical fibers are made from recycled plastic water bottles.
- Set in sleeve construction for easy layering and versatility.
$225.00
Sometimes the difference between staying in and going out comes down to your wardrobe, and this item will give you more comfortable days in the saddle than any other shoulder season gear you own. This triple-layer, four-way stretch jacket is completely windproof and highly water resistant. It’s a three-season foul-weather piece that we consider weatherproof, thanks to our proprietary PI Dry treatment, which causes water to bead up on the surface and run off before it has a chance to soak through the fabric and membrane. We bond seams at the cuffs, neck and hem to reduce bulk and keep it form-fitting sleek. It protects like an insulated rain jacket, but fits like a long-sleeve jersey.
- PRO 3-layer, 4-way stretch AmFIB Softshell fabric is windproof, water-resistant and 50% more breathable than typical membranes.
- PI Dry water shedding technology provides all-weather performance.
- Bonded neck, cuffs and hem to minimize bulk. 2-way water resistant.
- Vislon Aquaguard zipper is easy to use with gloves for quick ventilation.
- Two back pockets plus zippered center pocket balance ease of access and all-weather security.
- BioViz reflective elements for low-light visibility.
$130.00
We gave this jacket a relaxed fit to allow for multiple layers of insulation, not to mention room to accommodate Thanksgiving leftovers. With its three-layer AmFIB Softshell fabric, it is warm, windproof and water resistant for comfort on changeable days. One sizable zippered back pocket offers room for keys, a credit card and even an extra pair of gloves.
- SELECT 3-layer AmFIB Softshell fabric is windproof, water-resistant and breathable.
- Full-length internal draft flap with zipper garage seals in warmth.
- Single zippered back pocket.
- BioViz high visibility colors and reflective elements.
$130.00
A super-versatile men’s cycling jacket that converts quickly to a vest, to adapt to changing conditions. Our most popular jacket, this highly versatile piece provides warmth and wind protection, and converts quickly and easily from a jacket to a vest to help you adapt comfortably to changing conditions. Zip on-and-off sleeves stash easily in the zippered back pocket for quick retrieval. Plus, a durable water-repellent finish sheds light rain to keep you dry in an emergency. The relaxed fit helps this men’s convertible cycling jacket layer easily over whatever you’re wearing.
- Sleeves zip on-or-off quickly, to convert between and jacket and vest
- Lightweight and breathable rip-stop Barrier fabric, made with 100% recycled material
- Durable water-repellent (DWR) treatment sheds light precipitation
- Rear upper mesh panel for ventilation
- Two-way zipper allows ventilation from top or bottom
- Dual side hem cord locks to adjust fit at waist
- Front zip hand pockets
- Rear zipper pocket for storing sleeves or essentials
- BioViz reflective elements for low-light visibility
- Available in XXXL
- Main Body: 100% recycled polyester
- Pockets: 100% polyester Mesh Section: 100% polyester
- Made in Vietnam
$125.00
Experienced riders point to a vest as an essential piece of every cyclist's wardrobe. One that's likely to get more year around use than any other outerwear you own. We took all the technology from our PRO Barrier Jacket and created a high-performance vest that will enable you to hit the road even when the weather looks moody. This is the perfect piece for riders who want weatherproof protection with enough stretch to fit like the rest of their kit. Thanks to its minimal bulk, it fits easily in a jersey pocket until the next time it's needed.
FEATURES:
- Pedal to Zero™: Going by bike 10mi / 16km offsets the climate impact of this garment
- Lightweight, high-stretch knit face fabric for a close-to-body fit
- Made with recycled content
- PI Dry® technology for permanent water-shedding performance
- Interior membrane for wind protection with breathability
- Two-way zipper allows ventilation from top or bottom
- Silicone rear gripper to hold the jacket in place while in a riding position
- BioViz® reflective elements for low-light visibility
- Form fit
FABRIC:
- 100% Recycled Polyester
$150.00
Our go-to men's bib tight is made for those days when comfort depends on consistent warmth. To deliver a great shoulder season riding experience, Thermal fleece fabric insulates and transfers moisture efficiently, while PI Dry water-shedding technology wards off splashes and light rain. Fewer panels and reduced seaming, combined with a stretchier fabric, has improved both fit and comfort. And, the material is so stretchy, we've been able to eliminate the zipper from the ankles, improving both durability and comfort. Raw-edge bib straps eliminate bulk for improved layering comfort. These tights do not have a chamois, allowing you to pull them over your favorite shorts or use them for other cold-weather activities.
- Ultra-soft Thermal fleece fabric for pedaling comfort and thermal regulation
- Made with recycled material
- PI Dry technology for permanent water-shedding performance
- Eliminated zippers at the ankles for improved fit and comfort
- BioViz reflective elements for low-light visibility
- Lower Panel: 56% nylon, 30% polyester, 14% Lycra elastane Upper Panel: 75% nylon, 25% elastane
- Made in Vietnam
- Type: Thermal
- Reflectivity: Low-light visibility
$165.00
We made this 3/4 tight for those days when shorts aren't enough, but for which tights would be overkill, protecting your knees and providing full calf coverage. Our improved Thermal fleece fabric provides quick-drying insulation, while fewer panels and reduced seaming combine with a stretchier fabric to improve both fit and comfort. We add full PI Dry water-shedding technology to ward off splashes and light rain. Raw-edge bib straps eliminate bulk and improve comfort. Our plush ELITE Escape chamois provides reliable comfort for longer rides.
- Ultra-soft Thermal fleece fabric for pedaling comfort and thermal regulation
- Made with recycled material
- PI Dry technology for permanent water-shedding performance
- ELITE Escape 1:1 Chamois with floating top-sheet design reduces friction for all-day comfort
- BioViz reflective elements for low-light visibility
- Lower Panel: 56% nylon, 30% polyester, 14% Lycra elastane
- Upper Panel: 75% nylon, 25% elastane
- Made in Vietnam
- Type: Thermal
- Reflectivity: Low-light visibility
$125.00 - $130.00
The Women's Expedition Bib Short was created to go the distance. We integrated low-profile cargo pockets on the thighs for easy access to smartphones and snacks, and the flexibility to wear the top of your choice without neglecting carrying capacity. This bib was designed by a woman to eliminate issues riders often have with bib shorts, so our drop tail feature makes it easy to answer nature's call quickly and discreetly. The plush and breathable Women's Elite Escape 1:1 Chamois is the perfect companion for long days in the saddle.
FEATURES
- Compressive ELITE Transfer fabric made with recycled content
- Drop tail design takes the hassle out of nature brakes
- Thigh cargo pockets provide additional storage options
- Women's ELITE Escape 1:1 Chamois pad with floating top sheet design reduces friction for all-day comfort
- Laser cut bib straps provide superior next to skin comfort
- Silicone print holds cuffs in place and provides a smooth transition from the short to skin
- 8" inseam in size medium
FABRIC
- Bottom Panel: 80% recycled nylon, 20% elastane Top Panel: 35% recycled polyester, 34% recycled nylon, 31% elastane Made in Vietnam
$39.99
Premium handlebar feel in harsh weather condition with touch screen functions.
The NEW 2.0 subzero MTB glove has an insulated upper hand for colder days. The NEW FormFit finger stitching offers superior comfort and handlebar feel in wet and dry conditions. The MicronGrip palm gives a super-slim profile despite being insulated and premium grip in all weather conditions. Protection is offered by a micro-injected 3D Brush Guard on the pinky and knuckle areas. Go out and ride no matter what the weather with the 2.0 SubZero glove.
- SubZero upper hand insulation for harsh weather conditions
- FormFit finger stitching for superior fit and handlebar feel
- MicronGrip palm Super slim with superior handlebar feel
- Excellent dry and wet grip
- Very durable with touch screen function
- Silicone grip print
- Touch screen compatible
- Micro-injected 3D Brush Guard reinforced pinky and knuckles
- Multi-row, technical thread stitching
- Pre-curved seamless palm
$34.99
Ultimate airflow and protection in a lightweight, durable glove.
As one of the lighter and more minimalistic bicycle gloves in our product line, protection is offered by a micro-injected 3D Brush Guard on the pinky and knuckle areas, which increases the abrasion resistance of the glove. The NEW super-slim design is lightweight and flexible while the NEW FormFit finger stitching offer superior comfort and handlebar feel in wet and dry conditions. Try these if you want super-comfy gloves with a touch of protection!
- Micro-injected 3D Brush Guard reinforced pinky and knuckles
- New FormFit finger stitching for superior fit and handlebar feel
- New NanoGrip palm
- Ultra-thin for superior bike feel
- Very stretchy and flexible
- Premium dry and wet grip
- Touch screen function
- Touch screen compatible
- Silicone grip print for extra handlebar grip
- Fully vented X-Flow mesh upper-hand material
- Pre-curved seamless palm
- Lens/sweat wiper
- Stretch fit comfort cuff
- Multi-row, technical thread stitching
$49.99
A full-body glove with unbeaten handlebar feel and touch screen function.
The MTB 3.0 Lite gloves feature good airflow and Airflex impact gel protection on the knuckles. The NEW super-slim design is lightweight and flexible while the NEW FormFit finger stitching offer superior comfort and handlebar feel.
Uncompromised protection and comfort.
- New super-slim, 3D molded AirFlex impact gel protection for knuckles
- New FormFit finger stitching for superior fit and handlebar feel
- New vented, four-way stretch upper for comfort and breathability
- MicronGrip palm
- Super slim with superior handlebar feel
- Excellent dry and wet grip
- Very durable with touch screen function
- Silicone grip print
- Touch screen compatible
- Reinforced lower palm
- CE tested and certified as: Personal Protective Equipment 89/686/EEC
- Knuckle Impact protection EN 13594:2015
- Lens/sweat wiper
- Multi-row, technical thread stitching
$59.99 - $69.99
NEW super-slim gloves with ultimate protection and touch screen function.
The 4.0 Lite gloves offer premium protection using Airflex impact gel, a very advanced form of material bonding. The NEW FormFit finger stitching offer superior comfort and handlebar feel.
Favored by our downhill athletes, these gloves are CE tested and certified as Personal Protective Equipment. The soft touch palm is made from our proven NanoGrip fabric for an unbeaten handlebar feel.
The MTB 4.0 gloves will give you total control when riding down fast and rough trails.
- New super-slim, AirFlex impact gel protection for knuckles, as well as third and fourth finger
- New FormFit finger stitching for superior fit and handlebar feel
- New improved upper mesh for great ventilation
- NanoGrip palm
- Ultra-thin for superior bar feel
- Very stretchy and flexible
- Premium dry and wet grip
- Touch screen function
- Touch screen compatible
- Vented, Lite upper-hand material
- Pre-curved seamless palm
- CE tested and certified as: Personal Protective Equipment 89/686/EEC
- Knuckle Impact protection EN 13594:2015
- Lens/sweat wiper
- Multi-row technical thread stitching
$29.98 - $39.99
$39.99
Up to 25% Off
All the coolness of a casual T-shirt hidden in a technical bicycle jersey.
The MTB 2.0 Jersey is made from a casual-looking, cotton-feel material which has a soft touch and keeps you cool on the hottest days. The stretch fit can be worn with or without body armor and the collar is neck-brace ready. Stay cool and feel relaxed.
- T-sleeve, performance shirt with a casual look
- Unique cotton-feel, lightweight, and stretchy material
- MoistureCool wicking mesh back panel for ventilation
- Stretch fit for riding with or without body armor
- Overlock stitched seams for comfort
- Collar design for use with or without a neck brace
- Microfiber goggle wiper and pocket
$100.00
BASE LAYER CHAMOIS BIB
A brand new premium Leatt performance base layer compatible with any LEATT shorts / pants.
Made in Italy from a lightweight 4 way stretch moisture wicking material with an above the knee cut to allow for protectors. The 4.0 Bib Liner has a unique horizontal fly opening for when your desperately in need in the middle of the forest.
They feature plenty of storage options. Mobile phone leg pockets with silicone grip to prevent the phone from sliding out when riding. 3 rear cargo pockets with silicone grippers and 1 cargo pocket for use with new Hydrapack Horizontal Bladder. Above the knee the bib liner has silicone leg grippers.
Great performance and comfort for long rides.
This product comes in plastic free recyclable packaging.
MTB 4.0 bib Liner:
- Base layer / compatible with any LEATT shorts / pants.
- Lightweight 4 way stretch moisture wicking material
- Above knee cut –to allow for protectors.
- Unique Fly opening.
- Mobile phone / storage leg pockets with silicone grip.
-3 Rear cargo pockets with silicone gripper.
-1 cargo pocket for use with new Hydrapack Horizontal Bladder
- Silicone leg grippers
- Stretch Stitch thread for seam strength
- Plastic Free Recyclable Packaging
- quad density "Performance" Chamois:
- ECO X-Tract Moisture wicking fabric
- Perineal and Ischiatic Quad density protection design
- Great performance for maximum long ride comfort
- Made in Italy
$34.98 - $50.00
$50.00
Up to 30% Off
CASUAL T-SLEEVE WITH TEMPERATURE CONTROL FABRIC
All the coolness of a casual T-shirt hidden in a technical bicycle jersey.
The all mountain 2.0 T-sleeve jersey is made from a cotton-feel material. TENCEL is made from utilized tree pulp in Austria, this recycled yarn is a premium technical fabric with great performance qualities. TENCEL is effective at keeping controlling body temperature in a variety of climates. It's soft touch is ideal for sensitive skin and all-day comfort.
The jersey can be worn with or without body armor and the collar is neck brace ready.
Stay cool and feel relaxed.- NEW TENCEL high-performance comfort material
- Long-sleeve tailored riding shirt with a casual look
- Soft-touch: less irritation than cotton, perfect for sensitive skin
- Stretch fit for riding with or without body armor
- Overlock stitched seams for comfort
- Collar design for use with or without a neck brace
- Microfiber goggle wiper and pocket
- Plastic Free Recyclable Packaging
- Size: XS-XXL
$99.98 - $160.00
$160.00
Up to 38% Off
HIGH-PERFORMANCE SOFT SHELL WINDBLOCK
So soft yet so tough!
Made from soft-shell, four-way stretch and water-resistant material, this jacket is windproof, breathable and has adjustable front and rear ventilation, and yes, it has a great tailored fit as well!
The latest features include an all NEW hood design. The Ride Adaptive Hood (RAhD) with its tall collar, can be worn in four different configurations giving you the perfect coverage for all weather situations. A patent-pending magnetic hood system keeps the hood fixed to your helmet or back, finally, no more flapping around! The unique Leatt ClimbVent also lets you open up the jacket completely for maximum ventilation on climbs.
- Anti-Slip Shoulder patches ensure that your backpack will stay in place and brush guards on the forearms keep your jacket safe from snags.
- 10.000mm waterproof/ 10.000g/m² breathable material
- water-resistant softshell jacket with 360° stretch for superior comfort
- NEW Ride Adaptive Hood (RAhD)
- Over the helmet fit
- Stealth adjustments
- Over the chin for superior comfort
- Chin fold design for riding or casual fit
- Magnetic hood system (Patent Pending)
- Keeps the hood at the back or
- Fixes the hood on the helmet (helmet magnet included)
- ClimbVent connector for pedaling with the jacket open
- Shoulder Brush Guard with anti-slip function for improved backpack fit
- Dirt, water and stain resistant fabric coating
- Front zips are two-way pocket vents
- Tailored fit for riding with or without body armor
- Brush Guard fabric protection on elbows.
- Front and rear ventilation
- Pass pockets on left arm
- Microfiber goggle wiper
- Stretch fit cuffs and hems
- Seat gripper, prevents jacket rise
- YKK – Japan. Top Quality Zippers
- Reflective printing on lower back
- Plastic Free Recyclable Packaging
$89.98 - $150.00
$150.00
Up to 40% Off
COMPACT PUFER JACKET FOR CASUAL WEAR AND TRAIL MTB RIDING
Take to the pub or wear it on the trail. The MTB 3.0 trail jacket is a high-performance garment for any occasion.
This brand-new jacket features an insulted front panel for extra warmth and protection from the wind. The back panel is 360 stretch fabric which offers great ventilation to regulate body temperature. The latest features also include an all-NEW hood design. The Ride Adaptive Hood (RAhD) with its tall collar, can be worn in four different configurations giving you the perfect coverage for all weather situations.
Made from lightweight, water-resistant and breathable 5.000/5.000 material the 3.0 Trail jacket also featuring our patent-pending magnetic hood system, it keeps the hood fixed to your helmet or back, finally, no more flapping around!
Take it everywhere with you, just don't lose it!
- 5.000mm/5.000g/m² water resistant / breathable shell
- NEW Ride Adaptive Hood (RAhD)
- Over the helmet fit
- Stealth adjustments
- Over the chin for superior comfort
- Chin fold design for riding or casual fit
- Magnetic hood system (Patent Pending)
- Insulated, soft quilted and bonded front panel for great ergonomics and water resistance
- Uninsulated back for breathability, lightness and flexibility
- ClimbVent
- Dirt, Water, Stain resistant fabric coating
- Chest and 2 hand warmer pockets
- YKK Japan Zips – top quality zippers
- Overseat back length with grip strip
- Plastic Free Recyclable Packaging
- Reflective rear detail.
$80.00
Comfortable cargo shorts for long days in the saddle.
The Leatt MTB 2.0 shorts have a shorter fit for the more trail- and adventure-orientated rider. The fabric is treated with a dirt- and water-repellent coating and has laser-cut ventilation, making these the ideal summer riding shorts. Two hip pockets and two thigh pockets make this short great for light cargo—very useful for those recreational rides and long days out. Be prepared and feel comfortable with the 2.0 MTB shorts.
- Durable 4-way stretch material
- Dirt-, water-, and stain-resistant fabric coating
- Two cargo, two hip, and one back pocket
- Soft-touch waist adjustment
- Laser-cut ventilation
- Reversed zippers and multi-row reinforced stitching
- YKK—Japan. Top Quality Zippers
- Seamless seat panel
Page 1 of 62
Next page