Filter By:
- Bar Ends (22)
- BMX (80)
- Bottom Brackets (268)
- Brakes/Levers/Pads (823)
- Cables (265)
- Cassettes/Freewheels (171)
- Chainrings (360)
- Chains (166)
- Show More Categories
- Cranksets (354)
- Derailleurs (200)
- Forks (213)
- Groups (34)
- Handlebar Grips/Tape (481)
- Handlebars (333)
- Headsets (217)
- Pedals (482)
- Saddles (487)
- Seatposts (147)
- Shift/Brake Combinations (78)
- Shifters (152)
- Shocks (36)
- Stems (206)
- Other (2640)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 4

$21.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 5

$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings
- Set of 4

$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms.
- Designed to fit Shimano Dura-Ace 9000 cranks
- Includes 4 T30 Torx bolts and 4 bolt covers
- Not compatible with absoluteBLACK Sub Compact oval chainrings

$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms.
- Designed to fit Shimano Ultegra 6800 cranks
- Includes 4 T30 Torx bolts and 4 bolt covers
- Not compatible with absoluteBLACK Sub Compact oval chainrings

$83.99
absoluteBLACK Oval 110 BCD 1x Chainrings for Cyclocross greatly improve traction for CX or gravel riding. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Provides excellent weight-to-strength ratio
- 12-Speed Eagle compatible
- Chainring bolts are included

$74.99
absoluteBLACK Oval 94 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for SRAM X01, X1, GX, NX, and GX Eagle cranks. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- For 48mm chainline
- Rings have built-in threads for ease of mounting and reduction in weight
- Chainring bolts are included

$21.99
absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames.
No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame.
Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat).
Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security.
- Mass/Size: 11.6g / one size fits all
- Compatibility: All braze-on frames and derailleurs.
- Adjustability: 6mm chainline adjustment provided on the slot for precise setup
- Material: CNC machined 7075 T6 / M5 stainless steel bolt
- Finish: type II anodizing

$78.99
absoluteBLACK Round 130 BCD Chainrings for Cyclocross feature a specially designed narrow-wide tooth profile that keeps the chain really snug, allowing you to leave your chainkeeper in the garage. By removing the chainkeeper and the bashring from your existing 1x setup, these chainrings allow you to save more than 100g on average (200g if using 2x drivetrain). They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability.
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Special chamfers are optimized for riding in the mud
- The chainring's offset helps to create an ideal chainline
- Chainrings are compatible with both clutch type and non-clutch rear derailleurs
- Compatible with all 5-arm cranks with 130 BCD

$6.00
Zipp Speed Weaponry Vuka Extension End Plugs
- Plastic bar end plug pair for 22.2mm extensions

$56.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare.
- Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding.
- The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul.
- Reach: 70mm
- Drop: 115mm

$30.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

$110.00 - $112.00
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum.
- Distinctive Zipp cosmetics
- 7050 Aluminum
- 80mm reach/125mm drop designed to fit a large number of riders
- Clip-on compatible
- Lifetime warranty

$40.00 - $55.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

$83.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).

$26.95
Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Includes bar end plugs

$24.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner.
- 6mm length
- Made in the US out of 7075-T6 Aluminum
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 7-8 Nm with light grease on threads only

$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push

$29.00
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike.
- Fits forks with 1 1/8" steerer tubes
- Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm
- 7075-T6 aluminum
- Never use a star nut on forks with carbon steerers

$15.95
So you've converted to a 1x drivetrain but now you have that Direct Mount boss looking lonely. Install one of these covers to clean up that unslightly mount and add some additional Wolf Tooth flair to your bike.
- Installs directly to low direct mount bosses

$29.95
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs
- CNC machined from 6061-T6 aluminum with stainless steel bolt
- Does not change the derailleurs total chain wrap capacity
- Fits standard derailleur hangers only
- Best used with Single or Double Setups - see manufacturer's site for more details

$21.95
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key

$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

$144.53
Threaded Angular Contact BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 124g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters

$144.53
Thread-together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Drive Side Bearing: Enduro Angular Contact - Non-Drive Side Bearing: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm – 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm stepped - Over Bearing Width: 91.8mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 145g

$144.53
Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width: 86.6mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 133g
Page 1 of 269
Next page