Forks

Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch

ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger 2.1 RC2 damper features independent high and low-speed compression adjustments - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm

A striking balance of low weight and exceptional downhill performance, the SID finds a new level of confidence and defines what modern XC race bikes are capable of. The SID Ultimate is built with more travel, an all-new stiff 35mm chassis that features our lightest damper to date, and the new Charger Race Day. This race-ready package also includes the redesigned DebonAir air spring, tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride, providing long-lasting fork performance and improved overall suspension feel. Lighter and more capable than ever before, SID will get you to the finish line faster. Features - New 35mm chassis is the perfect blend of low weight and stiffness for the modern XC bike - New Charger Race Day Damper - our lightest production damper with rock-solid lockout - New DebonAir air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control - New Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Machined/anodized crown - 2-bolt mounts to fit a short fender (RockShox fender sold separately) - Ultimate foil graphics package

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"

Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

- Double air spring system with independent positive and negative chambers - Adjustable from 130 to 160mm of travel internally - Redesigned air spring with threadless air seal head for service and travel change ease - Damper: Low speed rebound in addition to high and low speed compression adjustable; with 2.5wt damper oil and 11% lighter viscosity - Air volume adjustment with internal indexed system - Threadless aluminum steerer - 35mm low friction anodized upper tubes with SKF wiper seals - Post mount brake: minimum 180mm rotor with 210mm maximum rotor size - Boost 110: allows for a hub with a wider hub flange that provides the rider with a stiffer wheel for more precise steering - D-Loc 15mm bolt-on thru-axle - 27.5"+: 75mm wide by 739mm tall maximum tire size - 29": 64mm wide by 749mm tall maximum tire size

Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Genuine Kashima Coating on upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT4 damper and FLOAT air spring

The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g

Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look

- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch

• Cantilever brake mounts • 45mm rake • High-tensile steel construction • Threaded fork

• Cantilever brake mounts • Chromoly construction • Threaded fork • For 26-inch wheels • 200mm steerer length

• High-tensile steel construction • Springer suspension • Threaded • 1-inch diameter (7/8-inch inner diameter) • 20-inch version steerer length: 148mm • 26-inch version steerer length: 180mm

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 137mm - Brake Mount: Caliper - Rake: 35mm - Axle-to-Crown: 315mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 40mm

• Cantilever brake mounts • 45mm rake • Chromoly construction • 1-inch steerer diameter • 250mm steerer length • Threaded fork

Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels

• Chromoly construction • V-brake mounts • Fits bikes with 16-inch wheels • Steerer length: 250mm

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 165mm steerer length • Threaded fork • Compatible with 16-inch wheels

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

- Unicrown design with Tange Infinity CrMo steel tubing - Single eyelets pannier rack mounts and mini rack mounts - Fits 700c x 45mm tires with fenders - 15x100mm thru axle and International Standard disc brake mount

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

- 38mm chassis for increased stiffness and rider confidence - ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height. - Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature - Includes premium short fender

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. - LOWER LEG BYPASS CHANNELS As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. - LOWER LEG ARCH Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. - GRIP2 Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. -FLOAT EVOL Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. - Performance-Elite series with black anodized stanchions - Step Cast (SC) legs with narrow stance and stepped design to saves weight, decrease frontal area, and provide clearance for the spokes and brake rotor - FIT4 damper with 3-position damper control - 160mm to 203mm rotor compatible post mount - Lightweight Kabolt thru-axle - Tapered threadless steerer

In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs. The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride. All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest.

The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry Key Features: - 59 grams decrease from the previous model. - Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.

The beautiful Big Block track fork is available in both 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Length: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brake Mount (Fork): mid reach caliper (47mm - 57mm)

Darkwave fork comes with the 28mm offset our team loves and backed by an unmatched and legendary 41-Thermal lifetime warranty against bending and breaking. - Legendary lifetime replacement warranty – laboratory tested and team proven - Custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - Steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - Slightly longer steerer tube length for use with taller head tubes and Gyro installations - Rust-proofed with with a lightweight coating that provides the best anti-corrosion processing that's offered today - Optimized, 4mm thick dropout shape for grind and peg clearance - 7075-T6 pre-load bolt with 6 and 8mm hex key slots - 41 Thermal Processed: Sunday is the only company to use Odyssey's proven and trusted 41 Thermal heat treating. This formula has been refined and improved since the late 90's. The proven 41 Thermal process allows our products to be lightweight AND strong. It is also backed by a legendary lifetime warranty.

- 35mm chassis at home on the trail - stiff, playful and light, really light - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". - DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height - Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible - Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. - RockShox premium short fender included

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

- Tange Infinity CrMo steel fork for 27.5" (650b) or 29" MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades

- Ideal for the rider using 20mm thru-axle suspension fork that wants to go rigid, without buying a new front wheel - Exclusive 20mm axle with 14mm nutted ends for running a thru-axle hub with pegs - Lightweight and strong butted 31.8mm 4130 CrMo straight blades with shallow radius leg bends - Internally and externally butted steerer reduces weight, minimizes stress risers - 6mm thick CNC machined dropouts, axle slots aligned toward vector of impact - 51mm International Standard disc mounts and 20/14mm nutted axle set included. 3.1lbs (200mm uncut)

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack based damper that features external incremental Low Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top level performance to a new price point.

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush, highly tunable Solo Air spring - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

- Straight or tapered alloy steerer all road carbon fork - Fender mounts and 6 fork eyelets for water bottles/bags - Includes 12mm/15mm thru-axle on specific versions - Tire clearance for 700x42c 700x40c w/fender or 650Bx50c road plus tires - Steerer: 1 1/8" - 1 1/2" tapered or straight 1 1/8" available - Uncut steerer tube length is 300mm - Platform style racks for supporting randonneur style handlebar bags are okay, using the fork crown hole and lowest eyelet (just above the dropout) - Not compatible with Tubus Tara, Salsa DownUnder, and other lowrider racks, the mounts are designed for light loading only - Steerer tube expander plug not included - 747g - 45mm rake

For all the ups, downs and to get you to everything in between. Lyrik Select combines an updated DebonAir air spring with the trusted Charger RC damper for unmatched trail control and precision. Maxima Plush fluid reduces friction, silences noise, and provides all-around lasting performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise

Charge Hard. Based on the solid foundation of our D1 platform, this is the E1 series. Though many E suspension platforms take an approach of increased compression damping and higher air pressure, we knew there was more to it. The approach was to make a comfortable ride that maintained control when pushed hard. E-MTB's provide the luxury of ripping both up and down the trail. Due to this, comfort was paramount as you pedal over obstacles at high speed. Increasing compression damping wasn't the simple answer. Our D1 damper maintains a lighter compression tune for a supple ride that keeps you fresh until the battery runs out. Due to the added weight and mileage from an E-MTB, we increased the bushing overlap within the casting. This provides two benefits—structural stability and longevity. When pushed hard, the increased overlap maintains structural integrity for precise steering in big hit situations. Durability also comes into play with the luxury of riding farther in a shorter amount of time. The new bushing design will allow you to rack up the miles without the loss in performance. It's a simple approach, but aren't those always the best. Small changes equate to big advantages on the trail. This is the E1 series. - 67% More Bushing Overlap - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping

Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design. - 1-pc machined steerer tube with an integrated bearing race - Tapered legs - Tire clearance for 2.40” tires - Updated top cap retention design

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard FEATURES - 1-1/8 Inch 7000 Series Aluminum Steerer Tube - Standard Size Fork for Larger-Sized Racers - Internal Butterfly Steerer Tube and Fork Crown Interface - 10mm Standard Dropouts - Cold-Forged and Bonded Dropouts COMPATIBILITY - Box Two 1.1/8" Integrated Headset - Box One Carbon 45x45 1.1/8" Integrated Headset - Box Two Threadless Headset - Box Two Headset Spacers - Box One Front Load Stem - Box One Top Load Stem - Box Two Front Load Stem - Box Two Top Load Stem - Box One Delta Stem - Box One Center Clamp Stem - Box Two Center Clamp Stem SPECIFICATIONS - 20 Inch 24 Inch - Material High Modulus Unidirectional Carbon Fiber Construction - Steerer Material 7000 Series Aluminum - Finish High Gloss Black - Offset 32mm - Steerer Tube 1-1/8 Inch - Weight - 20": 560g / 19.75oz - 24": 585g / 20.7oz

The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm

- Tange Infinity CrMo steel blades with D-shaped cross-section - Fender eyelets at fork tips - Low rider pannier rack boess - Premium Cyclocross fork with CrMo blades - Choose disc or cantilever brake options - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Steerer 1-1/8" and 1", 350mm long, CrMo - Axle to crown 400mm - 44mm rake

- Premium Cyclocross fork with CrMo blades - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Designed for disc brakes, 160mm rotors (International mount) - Straight blade design with D-shaped cross-section blades - Tange Infinity CrMo steel - 350mm 1-1/8" steerer - 400mm axle to crown - Two sets of fork-tip eyelets - Low rider pannier rack eyelets - 60mm inside width

The RockShox SID SL Ultimate BRAIN incorporates a race-tuned Brain Inertia Valve with Position-Sensitive technology into the all-new RockShox SID SL chassis. New Position-Sensitive Brain technology provides more platform support while maintaining small bump compliance and chassis balance, making this the most efficient BRAIN yet. Position-Sensitive technology allows riders to sag into the fork 15mm for a balanced ride, providing supple small bump compliance and a firm pedaling platform without the need for a remote lockout or levers to flip. All new SID SL Ultimate Chassis features a machined alloy crown to shed even more weight while increasing stiffness. - New Position-Sensitive tune provides an increase in platform support. - New SID SL Ultimate chassis features increased stiffness, lighter weight, and reduced friction. - Torque cap compatible for stiff dropout/hub interface. - 100mm travel, 44mm offset, 110mmx15mm hub spacing.

Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.

Road-race. Specific. Performance. Futura Caliper is the most updated creation of the Columbus Carbon Lab department for lovers of the traditional caliper brake. The all-new Futura range completes its offer with an exclusive fork, designed for the rider, starting from bike geometry and biomechanics requirements and needs. In fact, the Futura Caliper is the only oversized 1-1/2” tapered fork with multiple-rake: 45 and 50mm options that allow the cyclist, and even before him, the framebuilder, to properly complete their bicycles with the proper geometry and solutions, according to body requirements, sizes and riding style. Realized using ultra-light aerospace carbon fiber, Futura Caliper offers an extremely sharp riding experience thanks to its oversized sections and shapes, designed for an overall weight reduction of the structure, enhancing its stiffness and precision while cornering. The streamlined tapered front section, together with the curvilinear geometry of the blades, minimize aerodynamic resistance, granting a good vibration-dumping attitude, where, the overall aesthetic result, enhance Futura Caliper capability to perfectly match and complete the most updated carbon fiber frames as well as the new-generation hi-performance steel, alu and titanium designs. - T700S monocoque carbon fiber - 300mm tapered carbon steerer - Clearance for up to 28c tires - 9x100mm carbon fiber dropouts - 350g

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

- Chromoly steel BMX style forks - Perfect replacement for modern BMX-inspired wheelie bikes - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Material: Chromoly - Race Diameter: 30mm - Axle: 3/8-inch

- Performance-packed, featuring an updated 38mm chassis, now compatible with new Pressure Relief Valves. - 38mm chassis for increased stiffness and rider confidence - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - Compatible with new Pressure Relief Valves - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride - Bolt-in torque cap adapters now included for the use with standard hub end caps