Handlebars

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

- Timeless, classically styled back swept touring bar - Bar end shifter and brake lever compatible - Outward grip angles for proper ergonomics - Material: Steel

Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.

Lightweight aluminum construction with a versatile riser bar design.

• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 7050-T6 series aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 281g (44cm)

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center

State-of-the-art SuperLogic construction where weight-to-performance superiority is the ultimate object. The SuperLogic Rizer bar is the best MTB handlebar for those looking for the lightest set up possible for their XC rig. - Carbon monocoque - 15mm rise - 9 degree sweep - Width: 710mm - 31.8mm center section - Not bar end compatible - Matte UD carbon finish - Weight: 145g

DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)

With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 862g - Lever Compatibility: Mountain 22.2mm

- Low-rise Black Ops chromoly BMX handle bar - 30-inch width with a 6-inch rise - Wide and low - Clamp Size: 22.2mm - Material: Chromoly

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

- Steve Potts and the other founders of WTB originated the first "dirt drop" style bar for Specialized back in the late 1980's. Steve Potts designed this modern version with updated fit and function. - Polished aluminum finish in black and silver - Made by Nitto in Japan

- Riser bar with extra bend and lots of rise - A bar to look at if your bike feels like it has too much reach or too little stack - 6061 T6 aluminum - Recommended for Bikepacking and commuting

- Riser bar with extra bend, but a low rise - Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags - 6061 T6 aluminum

Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross. - Aerodynamic integrated Cable Routing (ACR) - Full carbon handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Bar Clamp Diameter: 31.8mm - 115mm drop, 76mm reach - 12° outward bend - 10° forward angle - 25mm offset drops - 5mm rise - 205 grams (420mm)

- D-shaped lightweight optimized 2014 aluminum alloy construction - Provides better "pushing" compliance for a smoother ride quality - Provides better "pulling" stiffness for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm

Wider than the Clarence, with more room for accessories in the middle - 6061-T6 aluminum with 135mm straight section at the center - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep

- Ergonomically comfortable with extra flare for added control. Ideal for CX, gravel, touring and commuting, these bars are favored by off road, drop bar riders in particular - Drove bars feature enhanced bar width, flaring outwards 168 through the drop section - Durable shot peened and anodized finish with cable groove indents - 23.8mm tube with 31.8mm stem clamp bulge - 16 degree flare angle with 86mm reach, 130mm drop. Widths are measured at the lever clamp area - 6061 T6 butted, heat treated aluminum alloy

Flared Adventure and Gravel bar made of EC90 carbon composite - 16 degrees of flare (adds 68mm to bar width at tip of drops) - Each width of bar has a unique diameter and length ergonomic top section - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 208g @ 42cm (width measured center-to-center)

- Cam Zink designed bars with unique upsweep and backsweep - 9.5 deg bend x 4.5 deg upsweep - Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail - Made from custom gradient butted 7075 T6 aluminum - 800mm wide, 31.8mm clamp - Third party online sales strictly prohibited by manufacturer

- 6061-T6 polished aluminum finish in black or silver - Grip Area Diameter: 22.2mm - The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers - Bends forward 22-degrees before bending backwards - A design collaboration with Dream Cycle Vancouver

- Aero alloy construction with flattened top and aerodynamic integrated cable routing - 10 deg forward angle for a more natural wrist position, with 4 deg outward bend placing the drops 10mm wider than at the hoods - Shot peen black anodized finish - Width measured center to center - 310g (42cm)

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

Vision Team clip on aerobars are fixed extensions with adjustable length. - For 31.8mm base bar - Material: Alloy - Color: black - Length: 230-270 - Defined Color: Black - Weight: 464

- Integrated front extension provides additional hand positions - Designed and intended for all types of drop bar riding - Traditional drop bar shape with no flair to the drops - Lightweight 6061-T6 alloy construction - 439g (42cm)

Inspired by the BMX bars of yesteryear - 6061 T6 aluminum - Shot peened and anodized black or silver - The 22mm OD crossbar is not there just for strength, but allows installing accessories

- Drop + Riser="Driser"\n- Stylish 20mm rise provides a higher riding position without the need for stem spacers - Profiled top tube with semi-aero ‚ palm friendly‚ design is ergonomically comfortable - An additional 16 degree flare in the drop area adds 93mm of extra ergonomic enhanced control to the overall width - A great design for CX and Gravel racing, as well as a neat option for touring or commuting - 6061 T6 butted, heat treated aluminum alloy - Durable shot peened and anodized finish - 23.8mm tube with 31.8mm stem clamp bulge - 16 degree flare angle - 75mm reach, 125mm drop (effective drop 105mm) - Widths are measured at the lever clamp area (flare adds 93mm overall) - Control cable groove indents - Black anodized with laser logos

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Features an integrated aero bar that provides additional hand positions - Allows the rider to safely achieve an aero tuck position during long days in the saddle - Can be used with the armrest kit for added comfort (RI2030) - Aluminum construction with 6 degrees of back sweep - 31.8mm bar clamp diameter, 423g

The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Matte Black nano blast aluminum - Clip-on Compatible - Lifetime warranty

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

- Heavy duty steel construction - Variety of rises offered - Due to size some of the larger handlebars are freight intensive

Heavy duty steel construction with a retro curved design.

Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.

Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.

Chrome plated long-horn style design.

- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions

When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The stiffest and most aero integrated handlebar and stem system - All carbon construction - Di2 compatible with integrated junction box compartment and wiring conduits - Compact 125mm drop, 80mm reach - 395g

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

An updated version of a Ritchey handlebar bend now in a timeless high-polish silver finish. The NeoClassic features the traditional round drops that many Tour de France and Classics champions prefer with a shorter reach and shallower drop. - Material: double-butted 6061 alloy - Bend style: traditional - Top style: round - Width: 400, 420, 440mm - Drop: 128mm - Reach: 73mm - Drop flare: 0° - Flare out: 0° - Backsweep: 0° - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 300g (420mm)

- AL6061-T6 alloy construction - 16-degree flared drops for power, stability, and control - Flattened aero top and 5-degree ergo back sweep for enhanced comfort and grip - ISO-Road safety certified - Clamp Size: 31.8mm - Rise / Reach: 70mm - Upsweep / Drop: 124mm - Back Sweep / Bend: 5-degree - Color: Black - Finish: Matte - Type: Road Drop - Material: AL6061

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Drop/Reach: 115/68mm